Jun
17

Common Causes Of Plumbing Noises

A plumbing system could create several noises – but it should not. Every noise says to you something as to what is asking out for correction. You just need to understand the sound to put on the cure. For you to diagnose noisy plumbing, you have to determine first if the unnecessary sounds occur on the system’s inlet side-in other words, when water is turned on-or on the drain side. Noises on the inlet side have diverse reasons: excessive water pressure, worn valve and faucet parts, incorrectly hooked up pumps or other appliances, improperly placed pipe fasteners, and plumbing runs containing lots of tight bends or any other restrictions. Noises on the drain side often originate from poor location or, as with some inlet side noise, a layout that contains tight bends. Nevertheless, to be able to understand each noise you hear, listed here are the 3 common sounds that you may hear and find out the causes of it.

Whistling

If any type of sediment begins building up in the pipes, it will limit the amount of space which the water can flow through. Sometimes, this produces a whistling sound when the water is turned on. Whistling is an indication that pipes are way too small. This might be resolved by having pressure-reducing valves put in where the source of the whistling is originating from. This is usually around the section of the bends or “T”s situated in the pipes.

Rattling Pipe Sound

This shaking rattling sound that takes place when shutting off a faucet is commonly a result of waves of water pressure and is a problem that develops more in older homes than newer ones. This particular sound may also take place when water rapidly gets into a pipe which doesn’t flow freely, perhaps due to a change in direction in the piping such as an elbow connection or a “T” joint. In situations where the main cause is water pressure waves, air chambers and shock absorption fittings are usually a solution.

Squeaking and Creaking

Normally you will only hear creaking and squeaking noises from the hot water pipes. This is because the hot water pipes expanding and contracting with temperature changes. If the pipes expand, they begin to move inside of the straps holding them. When they cool down, they are going to contract. The scrubbing of the pipes moving around result in the squeaking and creaking sounds. These sounds are discontinued by placing cushions on the pipes in which the strapping is so the noise isn’t heard when contracting and expanding.

There are lots of noise that might emanate out of your plumbing system. These are typically 3 usual ones however there are plenty of more and depending on where noise is originating from and the type of noise,as they can signal a major problem or a simple repair. If you’re not certain of what the cause is, a professional need to be consulted. You don’t want to take a chance with your plumbing since the impact of a busted pipe on your residence and the resulting cleanup effort may be vital.

 

May
30

7 Plumbing Tools Every Do-it-Yourselfer Should Have in Their Tool Box

In fact, there are several plumbing problems which are relatively easy to do. All you should have is bit of knowledge and several simple tools to perform your own plumbing repairs and avoid the potentially high costs of working with a professional plumber.

1. A closet auger is the perfect tool for toilet clogs up that a plunger cannot take care of. It is a comparatively cheap tool that can reach even deep toilet clogs. Having a closet auger, you’ll seldom ought to call a plumber to fix a clogged toilet. There are also sink augers that are very useful tool that excels in solving blockages through sinks and bathtubs.

(C) toolstop.co.uk

(C) toolstop.co.uk

2. A pipe wrench is a long-handled wrench for the purpose of working on threaded connections. It is actually popular on thicker pipes requiring wider-opening jaws. While using the pipe wrench, make perfectly sure that the rear sides of the wrench’s jaws come into contact with the pipe. That will ensure that loosening or tightening of the pipe won’t damage the pipe or alter its shape

3. A basin wrench contains a long handle with jaws right at the end. They are meant to reach the nuts at the rear of the basin in which the faucet connects. It is an indispensable tool in case you are replacing a basin or a faucet or perhaps repairing a leaking faucet.

4. An easy yet crucial tool that you ought to keep in your toolbox would be the adjustable pipe wrench which deals stubborn pipes and having the grip you need. The adjustable pipe wrench increases pressure on the thing when you turn it, allowing you to swiftly remove pipes and various fixtures.

5. Plumber’s tape is a Teflon tape like material which is positioned on the threads of a pipe. This is low-cost yet efficient thin white tape allows you create a better and more leak proof seal on the pipes. Plumber’s tape just cost you a dollar or two and it’s sold in small rolls and can be commonly seen in home hardware outlets.

6. A pipe cutter for PVC pipe is actually a great tool for all kinds of sprinkler repair and for some plumbing applications in the house where PVC pipe is used. It is going to cut pipe up to 1″ in diameter with a clean cut. It really is easier and faster to use than a hacksaw and uses a ratchet assembly to help make cutting less difficult.

7. Possibly the most popular plumbing tool that most people have is the plunger. Utilizing the application of force and vacuum, plungers can be used to help unclog toilets. Not only are these plungers helpful for clearing clogs in the toilets, but they are also valuable in unclogging bathtub drains as well. They are available in a various sizes and styles which means you ought to know what kind to buy for several types of plumbing.

 

May
22

How to Clear Clogged Drain Pipes

One of the biggest concerns plumbers frequently observe in homes is clogged or slow drains. Clogs could eventually be a major problem that will need the help of a specialist when they are unattended accordingly. Yet, in these difficult times not everybody has got the finances to contact a plumber always. But as a property owner, there are lots of stuff you can do in order to avoid it too as providing minor checkup and repairs before phoning a professional.

(C) 247baltimoreplumbing.com

(C) 247baltimoreplumbing.com

We sometimes take our plumbing for granted and incorrectly think that they are able to handle anything we send down them. One drain may perhaps be meant to accommodate food waste and may possess a garbage disposer that come with it. The other side may possibly be meant to accommodate waste water. It is possible to stop clogs from developing in the sink by first being sure that only water and liquids proceed down the standard drain in the kitchen sink.

You must think of investing in a sink drain with a straining element that will collect food waste that accidentally falls onto this edge of the sink. A t home drain cleaning tactics could also help to prevent clogs and scum build up in the pipes. Sending a gallon of boiling water down each drain every month or two is one ticket for staying away from clogs. An alternative choice is pouring baking soda and vinegar down your drains and letting it soak for five to ten minutes.

Check out structural defects within your plumbing. These are typically a result of the natural movements of the ground, poor or leaking pipes, dropping of land level, growth of tree roots, and disintegration of ditches. These can hinder water flow and lead to complete obstruction. Speak to qualified plumber right away once these problems begin to come out.

There are lots of methods to prevent clogs in the home. Whether or not they appear in your kitchen or bathroom, drain stoppages can cause an extreme amount of hassle and hamper your daily schedule. It is advisable to often check your plumbing and conduct this preventive measures, instead of wait for water to leak to occur in the home due to clogs. And through this also you can avoid repairs and major concerns which is a tedious, costly and even impossible decision for irreparable damages. Much like in this common medical phrase ” Preventions is better than cure”.

May
16

Freezing Pipes – How to Avoid a Winter Plumbing Disaster

The winter months are the crucial season on your plumbing since you need to spend up lots of money on unnecessary plumbing repair. It is possible to steer clear of plumbing problems and repairs by adopting proper plumbing preventive maintenance. The level of winter plumbing protection varies on the areas where you reside simply because temperatures also vary from one place to another. It is enough if you have some common hand tools plus some plumbing supplies to protect your plumbing system.

(C) HGTV.com

(C) HGTV.com

For those kitchen sink pipes or any kind of direct exposed piping, it’s also possible to insulate. If you wish to attempt a DIY solution, use electrical heating tape to wrap them and then cover them with some type of foam insulation. If you are at all undecided about the process, talking to a professional licensed plumber to maintain this for you is always advisable.

Because standing water is the cause of freezing pipes, it’s also advisable to work some water through the plumbing system from time to time. Switch on the taps to allow for a little bit of water trickle out when it gets especially cold outside. When you keep the water moving through all of your faucets, it will keep the pipes from icing. A flowing water has lower freezing point compared to still or standing water.

Keep the home warm. Certainly, a warmer room temperature can keep your pipes protected. It’s when your room temperature reaches temperatures below freezing that you may have a problem. Should you leave for vacation, keep the thermometer set to fifty degrees just to avoid the potential for a plumbing disaster. Turn your water off entirely at the main line and drain your pipes.

Your family should also know where the water supply and the water drainage valves are, just in case there are any problems. Some information can save you and your family a lot of money in the future. Make sure that your family knows the home water system. This would include, water heaters, water supply pipes, water drainage pipes, sinks, bathtubs, showers, toilets, dishwashers, boilers, heating systems and drainage traps. When the pipes happen to be cracked, there is nothing still left to do but get in touch with the plumbing experts and have them reinstall piping. It is really an expensive and involved work, therefore ensure that you prevent freezing first.

Apr
03

Benefits of Using Plastic Pipes

(C) HomeAdvisor.com

(C) HomeAdvisor.com

Plumbing differs in each home and there are many different types of pipe that can be used in the home. But have you ever take into consideration that having plastic pipe may save the day? Why is that you are asking? To put it simply, there are various benefits of having a pipe system like this. At first, thinking about using plastic pipes in plumbing especially in water heater might sound incongruous. The obvious problem that you can foresee is the hot water melting the plastic pipe. Well, there are different types of plastics available for sale.

Degradation and corrosion

One of the greatest down sides of metal plumbing is it is subject to corrosion. With time, it isn’t a matter of if it may happen, but when. For house owners getting into houses that have been around for several years, the process may already be occurring. When metal corrodes, it leaves the prospect open not only to leaks, but to copper seeping into the water.

Environmentally, plastic pipes are quite pleasant to the environment given it could be recycled. Out there nowadays, there are several kinds of plastic that is being used for piping. One is Polyvinyl Chloride (PVC)which is a rigid plastic. It comes in 2 various colors namely blue that is for cold water piping, and orange which is for waste and sewerage. Plus there is its close cousin the Chlorinated Polyvinyl Chloride (CPVC), colored white that is being used for hot water delivery.

Furthermore, you may notice that plastic pipe work is less likely to hinder the flow of water over the long-term. Various types of metal pipes will likely rust or corrode and experience certain degrees of scaling on the inner surfaces. This has the potential to build up and prohibit the free flow of the water. A significant build up of scaling as time passes is certain to result in a block and slow up the water pressure. Plastic pipes aren’t likely to experience these issues so able to continue to provide free-flowing water which isn’t hindered in any way.

Cost-effective option

Anyone who is fitting a property with plumbing or is seeking to cut costs in industrial applications needs to consider plastic pipe fabrication. It’s much less costly than copper and many other metal materials frequently used in industry. These costs aren’t only helpful from the point of purchase, but from a transportation angle as well. Because they are much lighter, they cost less to transport, meaning more money in any family’s reserves.

Feb
10

Signs and Detection of a Plumbing Leak

You will find apparent leaks, and there are also the leaking that hide from us and are not always very easy to see. These plumbing leaks can take place at any time. We could save lots of money in case you these leaks are discovered faster. It’s not necessary to wait for a pipe to burst or find major water damage in your home to understand you’ve got a leak. You will find signs you could look for spot leaks early. It’s extremely necessary to watch for leaks in your residence given that they can happen anywhere. Seek out leaks anywhere in which there may be running water. If you wait too long it could end up costing more income through water damage, or even worst a ruptured pipe.

1. Search for staining on the walls at your residence. There are lots of types of staining which can be a result of hidden pipe leaks, like stains with distinct borders, black blotches or gray lines.

2. Perhaps the initial troubleshooting step you are able to take to determine this plumbing dilemma is to listen for the leak. Before you can do that, you need to find the water supply valve in your house and turn it off. Once you close the valve, pay attention for leaking water wherever it may be–in the bathroom, kitchen or even basement.

3. Leaks can often lead to paint to peel or chip off. Additionally, run your hands across dubious areas to check on for bulging or dips; concealed leaks sometimes cause framing to swell or warp.

4. A musty odor that never goes away could mean you’ve got hidden water pooling somewhere at your residence which you cannot see. Use your nose this time to smell out in which the problem area may be and check there for other warning signs of a leak.

5. When your water bill out of the blue takes a big jump, it could indicate that something is leaking. Instead of hollering at your kid about taking extra-long showers, take into consideration that you may have a much more major problem.

After you have detected your leak, fix it immediately. The most common reason why roof leaks become such a challenge is because people take the problem for granted and do not do anything about it until it’s far too late. If you fail to fix the problem by yourself it’s better to call an expert to repair the roof, either way do it fast. Professionals know exactly where it’s coming from and may take care of it before your home gets damaged. After you found your best plumber, go ahead and give them a call out to your property to help you save money and your house.

Jan
19

Help Environment With Green Plumbing

(C) todescoplumbing.com

Everyone is becoming more and more aware of living a more green life. For this reason there has been an increasing interest in having green plumbing put in over the past couple of years. Plumbing is one of the areas that is going greener than before. There are numerous advantages to going green with a plumbing system and one of them is improving your household, not only from a health perspective but in addition on energy cost perspective.

Although going green with plumbing sounds like quite a costly undertaking, it is not so in the long-run in comparison to the standard styles of plumbing. The first remodeling of the plumbing in your house will surely cost a little more than expected, but going green with plumbing will ultimately pay-off in the form of lower water bills and energy costs. However, it is usually preferable to ask for professional advice before choosing green plumbing products. The initial costs of installing the green plumbing materials are generally higher than that of regular plumbing products.

With regards to water heating, standard water heaters store water in the tank which is heated continuously to maintain the temperature. Even if not required, water remains to be heated which results in extra expenditure. The tankless models of the water heaters are the far better options that are designed to heat the water only on demand. Another choice to get hot water is the solar water heater. It makes use of solar power to heat the water which is a greener option.

On top of this, the reverse osmosis and water filtration systems may be replaced, so that the house is made more energy-efficient. Low flow showers and faucets, along with low flush toilets are other means of saving on the water bill.

In addition, Grey water is the water which happens to be once used for bath, laundry or bathroom sinks. This water can be utilized to further nonpotable use just like for watering the garden, mopping the floor, flushing and washing the cars. The recycling of this water is the environmental use of sound plumbing. The easy change in plumbing to direct this water from sink to flush, or from laundry to garden, can’t only save the fresh water but will also save the nature from waste.

Going green with the plumbing will make a huge difference with regards to the energy and water costs of the home. Soon after replacing the regular products with environment-friendly products, the main difference in the costs is highly evident. If the aspect of health is regarded, green plumbing may help the residents in a larger way. For example, getting a green water purifier installed will ensure that you get cleaner water than what the usual products have to offer. Becoming environmentally friendly with plumbing furthermore allows you to stay in peace that you are doing your bit to help maintain a cleaner, safer and much more sustainable environment.

Jan
12

How To Prevent Sewer Backup From Happening

A sewer backup trouble can be disheartening and awful. Getting up one morning to find your basement or bathroom flowed with raw sewage can be quite a bad experience. In addition situations such as this may cause toxic black mold growth, which may be a large health hazard. You should realize what to do if your home encounters a sewage backup, and the way to prevent it.

1) Large Items

The most frequent grounds for residential sewage backups is the flushing of things which are too large to fit the line for instance baby diapers, home litter, sanitary towels and tampons, keys, – and the list can go on. Emergency plumbers salvage from pipelines all sorts of peculiar things that people flush down the toilet like dentures, unwanted jewelry and animal litter. People often push large things to the sewage that causes it to block.

2) Backup Device

A blocked sewer could be a huge dilemma once this isn’t determined at an early stage. Aside from a growing number of costs, this will take time to solve. Digging into the pipe lines would certainly be your last resort because this process can be a bit messy. You wouldn’t like to replace all of your system. Professional plumbing contractors have high end equipment to flush sewer lines without having to change the entire structure.

3) Cooking Oil

You must steer clear of pouring oil along with other grease based items in your drains or toilet. Cooking oil tends to solidify after cooling hence clogging your sewer line. To be on the safe side you need to remove the oil in a heat-safe container.

4) Shrubs and Trees

That is something which can be difficult to deal with, due to the fact roots appear to have a mind of their own. They could actually grow into the pipes, which might cause holes in them and then create blockages. Additionally, it can let the sewage to go into the ground. They even can crush the pipes in some instances. Even when you don’t have trees on your lawn, neighboring tree roots might actually creep beneath the ground and damage the pipes. The best way to avoid having to make such a costly repair is to employ a drain cleaning company to service your sewer system.

5) Other Preventive Measures

There are various ways in which you can prevent sewer backup from happening. A great way is placing wooden or rubber plugs on your drains prior to a heavy rainstorm. If you do not want to go on installing the plugs before every heavy rains, it’s a wise idea that you set up permanent plugs. Again, you need to make certain that plugs are professionally installed.

Dec
27

Basement Plumbing Maintenance Tips

Of all the phases of a construction project in a basement, the plumbing phase can be the hardest to accomplish for a number of reasons. To begin with, any waste water in general, usually has to be pumped out. Secondly, basements tend to be very unforgiving when it comes to leaks, even very minor ones.

 

Although not every home has a basement, those that do require special attention to the plumbing system. Just like the bathroom and the kitchen, the basement plumbing system requires regular maintenance in order to avoid emergency plumbing situations. Follow these basement plumbing tips to keep everything in your home running efficiently.

Understanding the Basics

Water Main Shutoff ValveFirst things first – when you are thinking about the plumbing system in your home, it’s important to know exactly where the water shutoff valve is located. The shutoff valve is usually found right where the main supply pipe enters the house coming up through your basement floor, either next to or very close to the water meter. The main shutoff for the house will be one or two valves near the main water supply pipe that can be turned on and off by hand.

There may also be an additional shutoff outside the house, buried in a cavity that is sometimes referred to as a “buffalo box.” If you have a buffalo box, it will generally be found in the ground near the street or the edge of your property. The box will often have a round metal cover. Pry open the cover and look inside with a flashlight. There will be a valve that you can turn by hand or with a long-handled “key.”

If you will need to shut down the system often during the course of a project, find your external shutoff and use it to shut off the water. Don’t depend entirely on the inside shutoff (particularly if you have an older home) – it can break, leak, or stop shutting off.

Other basic basement plumbing maintenance tips include the following:

  • Check your water meter during a period of time when no water is being used. Make a note of the meter reading and check it eight to 10 hours later. If the meter has moved, there is an indication that you may have an undetected water leak, which should be corrected.
  • Stop annoying water hammer noises by installing shock absorbers that absorb vibrations in water lines.
  • Septic tanks should be inspected and pumped every three to five years to help prevent costly replacement of the filter field.

Basement Clogged Drain Tips

Many basements have floor drains that will remove wastewater from washing machines, air conditioners, water heaters and other things like vehicles covered in snow. Just like other drains, these can collect scum and debris and require regular cleaning and maintenance. Here are a few basement plumbing tips when it comes to floor drains:

  • Clean your drains regularly. Clear them of visible debris and use an old toothbrush to scrub away substances and any dirt you see off the edges.
  • To further clean your drain, pour a bucket of boiling water down and wait 15 minutes. Then add a 16oz box of baking soda down the drain and make it fizzle by adding 3 cups of vinegar. Wait another 10 minutes and add 6 cups of boiling water slowly. Wash away what’s left of the vinegar and baking soda.
  • If you want to attempt clearing a clogged floor drain yourself, rent a power auger with 50 ft or more of cable and follow the instructions for use.

 

See more: http://www.rotorooter.com/plumbing-basics/plumbing-in-your-home/basement-tips-and-maintenance/

Nov
30

Services Offered by Plumbers

Residential plumbing is amongst the most important parts of your property. It helps you take a shower, keep the water hot and even do your dishes. All households and company encounters various difficulties with their plumbing. Plumbing technicians arrive at their rescue and solve their issues just like unclogging the pipes, installing new pipes and checking for leaks to name a few. Plumbing entails different varieties of services for each plumbing necessity. This is exactly why it is very important find a very good plumbing contractor to service your property regularly.

All Plumbing Repairs

If your plumbing requires repair or maintenance or even complete substitutions of the pipes, plumbing companies can perform the task after identifying the actual need. They are able to fix broken/damaged water lines, pipes, rusty junctures, faucet leaks, commode repair; sever repairing, garbage disposals, low water pressure, and even backflow etc. If needed, they have the ability to offer setting up any plumbing fixture with minimum disturbance to your property.

Water Heaters

These are professionals who have been in the field for years and have a better idea of how a water heater should be done. Your service may involve a advised replacement of your entire system if it is outdated, old, and unproductive or you might just need a replacement of certain parts. This service could lead to a huge investment on your part since it permits you to cut back on your monthly energy expense and can help you to become more eco-friendly as you use less resources in your house or office.

Drain Cleaning

Plumbers have got all the necessary tools that you might not have to unclog drains and repair water heaters. Doing it yourself could damage your home and cost you more over time. Allowing an expert take care of your needs is the best thing that that can be done for yourself and the condition of your house. Drum machines are just one type of equipment that experts use to unclog piping, vents and drains. The cutter blade on the end makes sure to get the job done right without destroying anything. It is going to scrape out any blocking and debris that are stuck on the side of the piping.

Plumbing can be quite a complex process, regardless of whether you want a new sink, or you want to route a water system in for your new fridge. When you use an expert plumbing company for all your maintenance, repair, and installation needs, you’ll be able to feel at ease that you’re taken care of. You will also find that there is a budget for all of your plumbing needs, and will not break the bank from upgrading your fixtures or repairing old plumbing pieces that break.